Inquiry
Sign In
日本語
Diaphragm Liquid Pump - DAP Series
Features
- Typical flow rates of 500 ml/min and operating pressure range of -60 to 100 kPa. +20% or higher flow than competitive pumps of similar size, even at higher pressures. These pumps are also self-priming.
- The life-cycle is even longer than other competitive pumps.
- No metal contained in wetted parts (see table below). Suitable to use with a wide variety of fluids, and functional in pumping gases as well.
Specifications
| Model Number | DAP-500P-N1E |
|---|---|
| Motor | DC Motor |
| Typical Flow Rate* | 500 ml/min |
| Maximum Discharge Pressure | 100 kPa |
| Maximum Vacuum Pressure | -60 kPa |
| Fluid Temperature Range | 5 ~ 80℃ |
| Ambient Temperature Range | 5 ~ 40℃ |
| Rated Voltage | 12 V DC or 24 V DC |
| Power Consumption | 8 W |
| Port Connection | Hose Barbs |
| Wetted Materials | PP, EPDM |
| Weight | 168 g |
*At 0 kPa backpressure.
Note: Specifications etc. may be changed at any time without notice.
Flow Curve
*The flow curves of the competitive products are the average values of three commercial products randomly sampled and measured by Takasago. The flow curves of our products are the average values of ten samples. All the values are only for reference and not guaranteed.
*Flow rate varies depending on the temperature and the tubing conditions.
Dimensions
