Inquiry
Sign In
日本語- Home
- Products
- Takasago Fittings
- Fitting for PTFE tubing
Search by SpecificationsFitting for PTFE Tubing
There are two types of screw fittings, a flare type with the seal parts inserted in the end of the tubing and a flange type, which is used with tube-ends modified into a trumpet shape. We offer a variety of fittings depending on the tubing diameter and the thread size. Please feel free to contact us for more information about these fittings for PTFE tubings.
Search by SpecificationsList of Fittings
-
SM Series
SM Series
This is a flare type fitting for a flat bottom thread. Simply insert the flange-shaped molded seal part ("Seal Joint") into the end of the tubing for use.
- Tubing I.D.: 1.0~4.0 mm
- Tubing O.D.: 2.0~5.0 mm
- Thread Size: M6, 1/4-28UNF, M8 P=1, 5/16-24UNF, or M5View Details
-
FM Series
FM Series
It is necessary for the user to enlarge the end of the PTFE tubing into a trumpet shape before using this fitting.
- Tubing I.D.: 1.0~4.0 mm
- Tubing O.D.: 2.0~5.0 mm
- Thread Size: M6, 1/4-28UNF, M8 P=1, 5/16-24UNF, or M5View Details
-
TSMC Series
TSMC Series
This is a straight fitting for a taper pipe thread. It is made from machined fluoropolymers, so it is suitable for high chemical compatibility.
- Tubing I.D.: 1.0~10.0 mm
- Tubing O.D.: 2.0~12.0 mm
- Thread Size: R1/8, R1/4, or R3/8View Details
-
TSML Series
TSML Series
This is an elbow fitting for a taper pipe thread. It is useful for limited plumbing space.
- Tubing I.D.: 1.0~10.0 mm
- Tubing O.D.: 2.0~12.0 mm
- Thread Size: R1/8, R1/4, or R3/8View Details