Fingertop Size Peristaltic Pump

1. Compact dimensions
2. Stepper motor type with 5 different discharge rates.
   Range of minimum 0.06 μL/min to maximum 1.1 mL/min depending on the pump option.
3. Tubing options of Silicone or PharMed® BPT.
4. Detachable / Replaceable Pump Head
5. Pump head may be sterilized by autoclave or gamma ray^*
6. Suitable for analytical instruments, medical devices, fuel cells, drug delivery systems, regenerative medicine (cell culturing), etc.
7. An easy-to-use controller is available upon request (Sold Separately). Please feel free to contact us for more details about the controller.

   Controllers for RP-QⅡ/RP-QⅢ

Note: Details such as specifications, etc., may be changed without notice.

^*: Silicone Tubing: Autoclavable one time at 121°C for 25 minutes. / Gamma-ray sterilization with 25 kGy.
PharMed® BPT Tubing: Gamma-ray sterilization with 25 kGy. (Not Autoclavable)

We also have a similar product to this pump, it's called:

1. Peristaltic Tubing Pump - RP-Q series

MECHANISM OF THE RING PUMP

For more information:

Mechanism of the Micro Peristaltic Pump

Note 1: Details such as specifications, etc., may be changed without notice.

Note 2: Visual diagram above is from Aquatech Co., Ltd.

VIDEOS OF THE RP-Q SERIES

Note: Details such as specifications, etc., may be changed without notice.

SPECIFICATIONS

Swipe left to see the remaining contents

Model Number	RP-QⅡC / RP-QⅢC
Motor	2-Phase Bipolar Type Stepper Motor
Pump Method	Peristaltic Pump
Type	Miniature Peristaltic Pump
Rated Voltage	3.0 VDC (Recommendation)
Power Consumption	350 mW
Tube Material	Silicone or PharMed® BPT
Pumped Volume Adjustable Range	1.2 ~ 1,100 μL/min by stepper motor
Maximum Pumped Pressure	≧30kPa
Weight	Approximately 11~13 g
Remarks	Mounting Flange: None (Optionally Mounting Clip, for RP-QⅡB / RP-QⅡC) / Equipped (RP-QⅢ)
Pump Head Replacement	Possible *2
Notes	Discharge Rate: 1.2 ~ 1,100 μL/min*1 Model Number Tubing Wire Length / Connector*2 Model # of Pump Head Compatible Controllers Material I.D. O.D. RP-QⅡC1.5S-1P1A-DC3VS RP-QⅢC1.5S-1P1A-DC3VS Silicone 1.5 mm 2.5 mm 50 cm Without Connector RK-QⅡ1.5S RE-C200/C201, RE-C600 (Without Connector) RP-QⅡC1.5S-1P1C-DC3VS RP-QⅢC1.5S-1P1C-DC3VS 50 cm With Connector RE-C500/C501, RE-C600 (With Connector) RP-QⅡC1.5S-1P1B-DC3VS RP-QⅢC1.5S-1P1B-DC3VS 2 m With Connector RK-QⅡ1.5S-D Note *1: The discharge rate is the value when using the motor controller RE-C600/C602 and driving at 1 to 1,000 PPS. Note *2: The pump with a connector is required for use with the motor controller RE-C500/C501. The pump without connectors can be used with RE-C200/C201. RE-C600 can be used with or without a connector. *: PharMed® is a trademark of Saint-Gobain Performance Plastics. Note: Details such as specifications, etc., may be changed without notice.   Motor Controller RE-C200/C201 at: 1 ～ 1000 PPS Drive   PC programmable Controller RE-C200: Master Controller Unit Item Specifications RE-C200 Input Voltage 5 VDC, 0.5 A (USB Supply) Output Voltage 2.6 VDC Motor Speed 1 ~ 2000 pps Number of Pumps Connectable 1 piece External Dimensions 100 x 100 x 35 mm Weight Approximately 143 g PC programmable Controller RE-C201: Slave Controller Item Specifications RE-C201 Input Voltage 5 VDC 3.0 A (100-240 VAC Adaptor Included) Output Voltage 2.6 VDC Motor Speed 1 ~ 2000 pps Number of Pumps Connectable Up to 4 pieces (RE-C201) + 1 piece (RE-C200)* External Dimensions 100 x 160 x 45 mm Weight Approximately 227 g Note *: Must be connected to Master controller RE-C200. RE-C200 may connect to 2 Slave controllers RE-C201. Note: Details such as specifications, etc., may be changed without notice.